Size Range:  0.025mm to 25.00mm (0.00098” – 1.00”)

Grades: AISI 200, 300 & 400 series, Nickel Alloy & Duplex Steel (Can also give other equivalent international grades)

Finish:  Soft Annealed – ¼ hard, ½ hard, ¾ hard, full hard (Matte or Bright Finish)
Raajratna manufactures general purpose wire in various grades for different applications.

Raajratna manufactures high quality Spring Wires from 0.06 – 22.00 mm in various grades, finishes & packing.  We can also supply Ni-Coated wires from 0.15 to 2.00mm. The wires can also be supplied from shaved wire & Eddy Current testing.
The Spring Wires are manufactured as per ISO: 6931/1, ASTM A313, EN 10270-3, JIS G4314, BS 2056 & DIN 17224 & also other equivalent international standards for producing various types of springs like Aerosol Spring, Compression Spring, Extension Spring and Torsion Spring as well as for Wire Form, Straight Pin etc.

These products are used for Irrigation (Sprinkler), Hardware (Lock, Faucet), Automobile, Aerospace,  Electronic, office supply, etc.

Raajratna manufactures high quality cold heading wires from 1.00 – 25.00mm with soap drawn skin pass uniform coating & from 1.00 – 10.00mm in annealed condition in various grades.The cold heading wires are manufactures as per ASTM A 493, AMS 5853 & JIS G 4315 standard as well as other equivalent international standards.

Surface finish : Soft / coated

Coating :We are using coating salts and drawing lubricants from CONDAT and also of Japanese origin (There is no hazardous coating or lubricant used).

We can also supply Copper plated/moly coated wires up to 13.00 mm diameter for cold heading applications. We can also supply shaved wire as per customer’s requirement. 

We supply the wires for welding applications viz. Fabrication, Railways, Automobiles, Pressure Vessels and for all general welding purpose. We are TÜV certified and also supply high Nickel Alloy welding wires for the special purpose.

Stainless Steel MIG Wire
Stainless Steel TIG Bar
Stainless Steel SAW Wire
Stainless Steel CORE Wire

Size Range  : 2.00mm to 50.00mm (0.08″ – 2.00″) upto 6 meters length.
Grades         : Stainless Steel, Nickel alloy & Duplex Steel
Finish           : Polished Bars, Ground Bars & Chamfered Bars

Hex size range            : A/F 2.00 mm to 22.00 mm (0.08″ – 0.80″)
Square size range     : 1.50 mm to 18.00 mm (0.046″ – 0.70″)
Grades                          : Stainless Steel, Nickel alloy & Duplex Steel
Supply condition      : Coils of 100 to 1,000 kgs
Straight length           : 1 meter to 6 meters max.

Raajratna manufactures all types of stainless steel & nickel alloy wires for various applications. At Raajratna, we have a state of the art facility for manufacturing and maintaining stringent quality parameters, considering the end application of wires. We have now started manufacturing wide range of profiles with precise control on dimensions to meet the customers’ requirements and uses of different shapes in applications like Filtration in petrochemical, oil & Gas, water, paper, pulp and food industries, mining industries, architecture, home appliances, building industry, textile machineries, automobile industries, anti-slip wire and general purpose.

Elongation:
Aj = 100 mm marked before tension measured after tension to fracture measuring point 2.5 x diameter from fracture.
A10 = Diameter x 10 marked before tension measured after tension to frature measured across fracture.

• Size Range: 2.00mm to 50mm (0.08″ – 1.00″) Up to 6 Meter length
• Finish: Polished Bars, Ground Bars, Chamfered Bars

We are supplying material with marking on each rod.

• Size Range: 1.00mm sq. to 100.00mm sq. Cross Section with a maximum Width 25.00mm
• Shapes: As per customer requirement.
• Condition: Annealed to Hard

• Stainless Steel Sheets (Grade – 316L – CR) from 2.00 mm to 6.00 mm
• Titanium Round Bars (Grade – Ti6Al4V Eli) from 1.50 mm to 25.00 mm
• Titanium Sheets (Grade – Ti6Al4V Eli) from 2.00 mm to 6.00 mm